Andre discusses FastCap Traction Dots that can be applied to anything you want to stay put.
|
|
 |
Archive for Jigs & Fixturing – Page 2
Anthony’s Hinge Jig is a great tool that helps install hinge hardware to Euro Style cabinets. The Hinge Jig locates the centerline for a hinge. It mounts easily into the 5mm holes and using the cursor to draw a centerline. If cabinets don’t have 5mm holes, use pins and align them along the edge of the cabinet, drill with a 5mm driver bit in the drill guides, and repeat the steps for finding the centerline. Another great product developed by cabinet maker, on the shop floor.
FastCap’s Dually Grommet is what cabinet makers have been asking for. It is a dual-sided interference locking grommet that finishes both sides of your hole. Works with depths from 3/4” to 2 1/2”. It snaps together to give holes a finished look in seconds! There is also a one-sided flush grommet (comes in white only).
FastCap’s 15° Drawer Drilling Jig (DDJ) will increase the speed and quality when attaching 5 piece shaker drawer fronts. The DDJ allows you to drill a pilot hole at PRECISELY a 15° angle through the corner of the drawer. The screw is now perfectly positioned in the center of the stile for maximum holding power. You no longer need washers or oversized screw heads to get the drawer front attached or adjusted. This allows the built-in adjustability of under-mount slides to easily fine-tune the drawer front to the cabinet.
Anthony’s Hinge Jig is a great tool that helps install hinge hardware to Euro Style cabinets. The Hinge Jig locates the centerline for a hinge. It mounts easily into the 5mm holes and using the cursor to draw a centerline. If cabinets don’t have a 5mm holes, use pins and align them along the edge of the cabinet, drill with a 5mm driver bit in the drill guides, and repeat the steps for finding the centerline. Another great product developed by cabinet maker, on the shop floor.
Translate »