Entreprenuer • Author • Speaker • Lean Maniac
paulakers.net • paul@fastcap.com • +1-360.941.3748

Archive for *FastCap Products – Page 2

Want to protect your floors and furniture?

Andre discusses FastCap Traction Dots that can be applied to anything you want to stay put.

Need the ultimate magnet?

The Super Mag is great for any time you want to hold something to a metal surface. It is powered by 6 high-performance neodymium magnets encased in soft non-marring EVA. An extra long knob allows for quick placement and removal.

Looking for a simple way to keep your tools where they belong?

The GPS Kit allows you to quickly identify tools by department or area. The color of the tape (made from super thin vinyl) and caps allow you to mark any shaped tool quickly and easily! Just wrap it in tape, or stick a dot on it, depending on the tool shape. Makes it fast and easy to determine which department tools belong to. Everything gets put back with no struggle, questions, or missing tools!

Want a easy way to set your blade height?

Want a easy way to set your blade height and fence spacing on your table saw or depth on drill press? check out FastCap’s Mag Shims.

Want to control the depth and straightness of your countersink?

The Spade Flush Mount Drill Bit System controls the depth and straightness of your countersink. Simply install your spade bit using the set screws, and use the micro-adjust to fine-tune cutting depth. Wide collar and smooth bearings ensure perfect results on every cut!

Want to see what all the cabinet makers have been asking for?

The Dually Grommet is a dual-sided interference locking grommet that finishes both sides of your hole. Works with depths from 3/4” to 2 1/2”. It snaps together to give holes a finished look in seconds! There is also a one-sided flush grommet!

Want to take some of the pain out of edge banding?

Applying edge banding to 3/4″ shelves can be a real pain. Stop the struggle with theFastedge Clamps. It securely holds your shelf in place allowing you to use both hands to install your peel and stick Fastedge edge banding.

15° Drawer Drilling Jig (DDJ) Intro

Tom Gafgen, the inventor of FastCaps 15° Drawer Drilling Jig (DDJ), walks us through how easy they are to use.

For more information on FastCap’s 15° Drawer Drilling Jig (DDJ), visit our website.

Did you know you can use 1″ EMT Pipe​ with FastPipe connectors?

Paul Akers discusses how to use 1″ EMT Pipe with FastPipe Connectors and accessories. He also discusses the new Table Top Connector (which works with both pipes), and the new EMT Canister bushing to fit EMT Pipe (Please note that you need to request the bushing when you order the canister).

For more information on FastCap’s FastPipe products, go to this link.

Not sure which of our Flex Screw Bags to get?

The Flex Screw Bag allows you to keep your screws separate and organized thanks to writable tabs. Built from tough ballistic nylon and fully collapsible. Great for screws, nails, and staples.

Translate »