FastPipe is a flexible and efficient system to make any cart, desk or workstation to your exact specifications. Any height, width or depth, whatever you can imagine you can build. The fittings (including canisters, rollers, assembly tool and connectors) and the pipes are 100% reusable. It is a steel pipe with PVC coating.
|
|
 |
Tyler Erickson shows us how to use FastCap’s FlushMount Drill Bit System (3/8″ bit) for countersinking drywall screws and then covers it up with FastCap’s 3/8″ Fastcap Cover Cap.
For more information on FastCap’s FlushMount Drill Bit System, visit our website.
For more information on Fastcap Cover Caps, visit our website.
Measure it! Mark it! Cut it…perfection! The Tile Boss makes measuring, marking and cutting difficult angles and straight wall sections fast and easy. With the Tile Boss every cut is perfect the first time.
Fastedge is a peel & stick edge banding made with high performance, ultra-bond PSA adhesive. It is fast, easy, and super strong, and increases in strength over time. Simply peel off the liner, stick, roll, and trim and you are done!
Paul Akers demonstrate FastCap’s Wood Washer which now comes in the 18mm and 9/16″. The original is still available and comes in 1″. For more information on this product, visit our website.
FastCap’s Kaizen Foam Knife Sled holds FastCap’s TriBlade at the perfect angle to get a perpendicular cut through FastCap’s Kaizen Foam. The wide edges easily slide against any straight-edge. The 1½” off-set makes it easy to measure and the notches located at the front and back of the sled help get straight cuts every time. Another great product developed by a cabinetmaker.
FastCap’s Drill A Slot is a quick and easy way to create a slot or pocket without having to search for a router or having to carry around a jig. The Drill-A-Slot works great for making knob slots, adjustable fence, or pockets for Loose Tenon Joints.
The Spade Flush Mount Drill Bit System controls the depth and straightness of your countersink. Simply install your spade bit using the set screws, and use the micro-adjust to fine-tune cutting depth. Wide collar and smooth bearings ensure perfect results on every cut!
Paul Akers used FastCap’s SpeedBrace to create a floating bench in his entry way. This just show how Lean is practical and beautiful!
Andre discusses FastCap Traction Dots that can be applied to anything you want to stay put.
Translate »